Home / Products / Alta decoracion / Estucos / GRASELLO

    • GRASELLO

    Classic aerated lime-based interior wall coating, petrifiable in contact with CO2, smooth, translucent mirror finish, which allows for multiple decorative effects, such as imitation marble, trowel-applied stucco, with chiaroscuro in the same shade or combinations with Marmorino.
    Finish
    Liso
    Performance
    0.7 - 1 m²/Kg
    Drying time
    20min
    Formats
    1K 20K 5K 20
    I´m interested in this product

    applications

    • Indoors
    • Cement
    • Plaster
    • Concrete
    • Brick
    • Stone
    • Restoration and decoration of façades and historic lime mortar based buildings
    • Interior decoration to obtain luxury finishes

    How to apply?

    • Stainless trowel
    • Pallete

    Colors

    Bases: White 400
    White and colors of High Decoration nº2
    - On plaster or cement substrates in perfect condition, do not apply the stucco directly -  moisten the surface with clean water until it is rehydrated.
    - It is advisable to add a small percentage of lime to this water to facilitate the adhesion of the stucco to the substrate (diluting a small amount of stucco in water would also suffice).
    - On rustic substrates such as lime walls, moistening them would be sufficient.
    - On brittle substrates, prime with a fixing emulsion.
    - If the substrates are painted, it is advisable to remove the paint as far as possible to optimise the anchoring of the stucco.
    - In areas prone to condensation, such as bathrooms, or in direct contact with water, protect with two coats of diluted Fijamont 15 days after applying the stucco, always checking that it is completely dry. Then apply two more coats of Impersil Aqua following the recommendations in FT.
    - It is recommended not to generate steam or wet the stucco until it is completely dry (15 days).
    Cement morter:
    1. Wait till complete drying of product (30 days minimum).
    2. Remove off any efflorescences by abrassive jet
    3. Neutralize alkaline surfaces.
    4. Extremely polished surfaces should be sandpapered.
    5. Clean rest of products on support and/or remainders.
    6. Fix the weak supports with suitable locking device (FIJADORA emulsion or FIJAMONT).
    7. Fill the defects of the support (to see family 6).

    Plaster:
    1. Wait for until well dry (max, 20% humidity).
    2. Eliminate rest of products and/or remainders.
    3. Clean the support of possible defects by means of abrasive spurt.
    4. Regulate the absorptions of the surface by means of primer.
    5. In surfaces excessively polished to sandpaper.
    6. Fix the weak supports with EMULSION FIJADORA or FIJAMONT.
    7. Fill with putty to eliminate the defects of the support (to see familly 6).


    Lime mortars:
    - Wait until completely set (minimum 30 days).
    - Clean the substrate of any foreign matter and/or residue.

    Downloads

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de GRASELLO Liso