MUROS MEDITERRANEOS CAPRI DUE

1. Anchor the support with the Fondo Muros Mediterraneos.
2.Mix the product manually with the colorant at the time of use.
In the case of having two different batches of the same product and color, it is recommended to mix them together before use to avoid possible differences in the size of the white floc.
3. Once the chosen color has been perfectly homogenized, apply a layer of Muros Mediterráneo Capri Due with a flat brush in a crisscross pattern and, as uniformly as possible.
4. Let it dry slightly so that it penetrates the base and acquires consistency.
5. Next, pass a flexible plastic paddle, applying uniform pressure, in the same or different direction, until the desired effect is achieved. In this way we will break up the thick particles that have not yet dried, thus obtaining blurred effects in a white tone. They will stand out and combine with the already hardened colored background.
6.Once the product has been colored, it should not be stored for more than 1 week.

Mortar of cement and plaster:
1. Hope until forged total (30 days minimum in cement, not to exceed 20).
2. To clean the support of possible eflorescencias by means of abrasive spurt, as well as to neutralize the alkaline surfaces.
3. In excessively polished surfaces, to sandpaper to open the pore.
4. To fix the weak supports with suitable locking device (fijadora emulsion or fijamont).
5. To clean all strange product support and/or remainders.
6. Masillar with plaste the defects of the support (to see in family Putties the lines corresponding to plastes in dust and prepared putties to make a suitable election).
7. Once the support is in good condition, anchor with L-500 coating or Mediterranean Walls Fund. This background is indicated for its breathability and texture to facilitate the finish with Muros Mediterráneo Capri Due.

Plaster:
1. Wait for until he is well dry (max,20% humidity).
2. Eliminate of the support strange products and/or remainders.
3. Eliminate eflorescences.
- To regulate the absorptions of the surface by means of selladora primer or paste matt.
- In surfaces excessively polished to sandpaper to open the pore.
- Fix weak or supports by means of suitable fixing primer (To see family 6).
- Fill with plaste to eliminate the defects of the support
- To deal with Monto Limpia Moho the supports with mould.

When the support is in conditions, to cast anchor with L-500/Fondo Muros Mediterráneo coating. This primer is indicated by its sweating and texture to facilitate the last coat with Muros Mediterráneo Capri Due.

-Wood: To prepare and to seal with Selladora Sellalux. Once dry to apply Fondo Muros Mediterraneo.