PALLADIO

-Ready to use product,no need to dilute.
-Use fixing primer EMULSION FIJADORA always (1 part Emulsión Fijadora: 6 parts water)  or with FIJAMONT (1 part Fijamont: 1 part Solvent num. 1403).
-Sanpaper to open pores in cases where  old paints are  in good condition and  pores are closed,  such as satin or synthetic enamel paints.
-Apply first coats by stainless steal trowel.  Apply thin layers until obtaining a uniform and smooth surface.
-Use fixing primer EMULSION FIJADORA (1 part Emulsión Fijadora: 6 parts water)  or with FIJAMONT (1 part Fijamont: 1 part Solvent num. 1403) before applying putty or plaster should it be necessary.  After a while,  apply same fixing primer again to regulate  surface absorption. Apply PALLADIO now and wait at least 6 hours before sandpapering with thin sanpaper or num 400.
-Finish by spatula or trowell using spatulated technique.  Excess of product should be removed inmediately.
-Polish: 1 minute after spatulating surface,  press  trowel or spatula until obtaining desired effect.
-A coat of CERA ESPECIAL ESTUCOS (special stuccoes wax) can be added to improve water repellency and brilliance uniformity.

Cement morter:
-On concrete performance is: 1 m2/kg
-Wait till complete drying of product (30 days minimum).
-Remove off any efflorescences by abrassive jet and neutralize alkaline surfaces.
-Extremely polished surfaces should be sandpapered to open pores.
-Anchor surfaces in bad condition with Emulsion Fijadora Fijamont (fixer).
-Remove off any foreing products or remains.
-Bad condition surfaces should be anchored properly (see family 6).
-Cover surface imperfections with Plastmont Exteriores (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Plaster:
-Wait till complete drying of product (20% max. Moisture level).
-Remove off any foreign product or product remains.
-Remove off any efflorescences.
-Use Selladora Sellalux (sealant) or Pasta Mate Industrial (matt paste) to regulate surface absorption.
-Extremely polished surfaces should be sandpapered to open pores.
-Very damaged surfaces should be fixed with Emulsion Fijadora Fijamont (fixer).
-Cover surface imperfections with plaster (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Mildewed surfaces should be treated with Monto Limpia Moho.