MONZON FIBRADO

Dirt, fungi, mould etc should be removed off surface and washed wiht fresh, clean water.
Shake product until perfectly homogenized.
This product  should be slightly dilluted on the first coat  depending on surface  condition and porosity level.
For horizontal surfaces: After primer, apply a 1st coat correctly dilluted, approximately 0,30 L/m2. Applu a 2nd coat of approximately 0,60 L/m2 and finish a 3nd coat whih same proportions.
For optimal results, place a squared piece of fibre glass mesh inmediately after applying the first dilluted coat of TORNADO ANTIGOTERAS.
Ensure that surface temperature is above 5ºC otherwise product may freeze.
Do not apply product at temperatures below 5º C.
Several layers should be applied (see recommended amounts)

- Cement morter:
Wait till complete drying of product (30 days minimum).
Remove off any efflorescences by abrasive jet and neutralize alkaline surfaces.
Extremely polished surfaces should be sanpapered to open pores.
Remove off any foreign products or remains.
Cover surface imperfections with Plastmont Exteriores (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Plaster:
Wait till complete drying of product (20% max. Moisture level).
Remove off any foreign product or product remains.
Remove off any efflorescences.
Use a sealant or matt paste to regulate surface absorption.
Extremely polished surfaces should be sandpapered to open pore.
Very damaged surfaces should be fixed with suitable product (See Family 6.
)
Cover surface imperfections with plaster or putty (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Mildewed surfaces should be treated with Montolimp fungicide.
-Recommended amount of mesh: 1st layer: 0.
30 l/m2 - 2nd layer 0.
60 l/m2 - 3rd layer 0.
60l/m2