FERRORITE
applications
- Outdoors/Indoors
- Iron
- steel
- Iron or oxidized steel
How to apply?
- Brush
- roller or spray gun
Colors
- Prepare the surface as explained above, PREPARATION OF NEW SURFACES AND/OR RESTORATION AND MAINTENANCE.
- Remove the product until perfectly homogeneous.
- Do not apply the product at high temperatures, or on surfaces exposed to strong sunlight.
- Maintain good ventilation conditions during the drying time.
- Do not apply while the relative humidity is above 80%.
- A minimum application of two coats at 50 - 60 dry microns (8 m2/l per coat) is recommended - for adverse conditions this thickness should be increased to 150 - 180 microns.
- At least two coats of 50-60 microns dry (8 m2/l by hand) are recommended. In challenging conditions, increase total depth to 150-180 microns.
- The surface must be free of extraneous material and/or residues, degreased thoroughly, free of dry zinc-based paint.
- If there is any rust, encrusted rust can be left and any loose of flaking rust sanded off. Then directly apply Ferrorite.
- If there are areas of rust, use a wire brush or other abrasive to remove any loose rust (ST3).
Downloads
I´m interested in this product
I´m interested in this product
Confirm the product and your contact information to be able to inform you and advise you in a personalized way.
Readily available stock
Gestión automatizada de las ubicaciones y las existencias de los productos.
Perfect orders
Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.
Warehouse management
Ubicación automática de los productos en el almacén mediantes transelevador.
Fast loading
8 loading docks for 24-ton trucks.
Our own transport
Flota propia de camiones de reparto preparados para transporte ADR.
We are always close by
Cadena de tiendas propia y suministro a puntos de venta en toda España.
liter calculator
Para pintar m2 de superficie con mano(s) de pintura necesitas:
de FERRORITE Brillo