FERRORITE FORJA

Antioxidant enamel and direct to oxide, with high protection against corrosion. Characteristic metallic wrought-iron finish - 3 in 1: rust passivator, primer and topcoat. Save time and layers by not needing a primer. Decorative enamel of high quality and duration.
Finish
Rugoso
Performance
8 - 11 m²/L
Drying time
1h
Formats
0.75L 4L 0.375L

applications

  • Outdoors/Indoors
  • Iron
  • steel
  • Iron or oxidized steel

How to apply?

  • Painting brush
  • Roller
  • Air-less gun
  • Air-mix gun
  • Aerographic gun
  • Low preasure turbo

Colors

Black 707, Grey 706 (tintometric base) and Ferrorite chart colors
-Apply on clean and dry surfaces, removing dirt with degreasers or detergents and clean water.
- Stir the product until it is fully mixed.
- Apply according to the marked dilutions
- Do not apply the product at high temperatures, or on surfaces exposed to strong sunlight.
- Maintain good ventilation conditions during the drying time.
- Do not apply while the relative humidity is above 80%.
- There may be changes in drying, performance or other properties depending on variations in climate, application or tinting.
- A minimum application of 2 coats at 50 microns dry is recommended, for adverse conditions this thickness should be increased to 150 microns dry.
Iron and steel:
- New and rust covered:
- To paint the support it must be free of strange residues, oil or fat, without any dry calamine.
- If it presents any sign of rust, this must be eliminated, using sand paper and eliminating any particle that may be loose (especially loose particles of rust and calamine).
Next apply Ferrorite directly.
- Shall there be any area showing corrosion: Clean with metallic brush or any abrasive tool till all the loose rust has been cleaned (ST3)

I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.