Home / Products / Esmaltes / Antioxidante metales / FERRORITE MARTELE

    • FERRORITE MARTELE

    Antioxidant and direct-to-rust enamel, with high protection against oxidation. Smooth finish with hammered effect. 3 in 1: rust passivator, primer and finishing enamel. Saves time and layers by not needing a primer and dries faster than traditional synthetic enamels. High quality and long lasting decorative enamel.
    Finish
    Brillo
    Performance
    8 - 12 m²/L
    Drying time
    20-30min
    Formats
    0.75L 4L 0.375L
    I´m interested in this product

    applications

    • Outdoors/Indoors
    • Iron
    • steel
    • Iron or oxidized steel

    How to apply?

    • Brush
    • roller or spray gun

    Colors

    Gray silver 001 (tintometric base), Gray 002, Black 021
    To apply on clean and dry support, eliminating the dirt by means of  detergents and clean water.
    It is better to put one first coat very fine  and later to apply one or two coats .
    To prepare the surface as indicates in the previous sections, PREPARATION OF NEW SUPPORTS AND/OR RESTORATION AND MAINTENANCE.
    - To remove the product until its perfect homogenization.
    - To apply following the dilutions marked in AS
    - Not to apply the product to extreme temperatures, nor on exposed surfaces to strong sun.
    - To maintain the conditions of good ventilation during the aplication and during the dry time.
    - Not to apply with relative humidities superior to 80%.
    - A minimum application of two coats at 50 dry microns (8 m2/l per coat) is recommended -  for adverse conditions this thickness should be increased to 150 microns.
    1. New and/or rusty iron and steel:
    New and oxidized:
    - In this case, the support must be free of strange products and/or remainders, as well as without grease and calamine - completly dry.
    - If it presents/displays oxidation signs, it is not necessary to eliminate oxide, simply to sandpaper and to eliminate particles badly adhered
    Next to apply directly Ferrorite.
    - If there are zones with corrosion: To eliminate with metallic brush or any abrasive until eliminating all loose oxide (Until ST3 or equivalent)

    Downloads

    Technical specifications

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de FERRORITE MARTELE Brillo