LUXATIN ECOLOGICO BRILLO

- Remove the product until perfectly homogeneous.
- Apply on clean and dry surfaces, removing dirt with soapy water. In case of extreme soiling, it is advisable to use degreasing agents or cleaning detergents.
- Apply in accordance with requirements marked in the attached application table.
- Do not apply the product at temperatures below 5º nor on surfaces exposed to strong sunshine.
- Maintain good ventilation conditions during the drying time.
- Do not apply whilst the relative humidity is above 80%.
- Clean tools with water immediately after use.
- Never apply it outdoors if there is an imminent risk of rain, and avoid excessively wet days.

Gypsum, cement and its derivatives:
1. Wait until fully cured.
2. Clean the surface of possible efflorescence and neutralise alkaline surfaces. Putty any defects in the surface with suitable filler.
3. Treat mouldy surfaces with Monto Limpia Moho.
4. Then apply Fixing Emulsion or Fijamont before application.

New wood:
1. Apply on wood with a moisture content lower than 20%. Sound, well degreased, dust-free and dry wood.
2. If the wood shows signs of ageing, it must be previously sanded, primed and the dust removed by brushing or any other mechanical means.
3. Before application, it shall be primed with Selladora Sellalux.

Iron and its derivatives:
1. Apply on well degreased, dust-free and dry surfaces. If they show signs of rust, the dust must be removed by brushing or other mechanical means. Oxifín is also suitable.
2. Subsequently, before application, treat with Acqua Anticorrosive Primer

Galvanised and light metals:
1.
- Degrease thoroughly and check adhesion.
2.
- If necessary, it is recommended to prime with Montoprimer Total Acqua.

PVC and plastics:
1.
- Degrease thoroughly and check adhesion.
2.
- If necessary, it is recommended to prime with Montoprimer Total Acqua.

Ceramics, tiles and glass:
1.
- Degrease thoroughly and check adhesion.
2.
- If necessary, it is recommended to prime with Montoprimer Total Acqua.