MARISMA MATE

- Stir the product until perfectly blended.
- Apply, following the guidelines set out in the attached application table.
- New wood should first be primed using  Anticarcoma Klearxyl Di if you wish to protect it against fungi and xylophagous insects.
- Do not apply the product in extreme temperatures, or to surfaces exposed to strong sunlight.
- Keep the area well-ventilated while the product is drying.
- Do not apply with relative humidity levels over 80%.

New wood surfaces:
1. The base must be free from other products and/or residues.
2. Apply on wood with a moisture content of less than 20%.
3. Apply on healthy wood that is dry and free of grease and dust.
4. Sand and remove any remnants of glue from the joints and faults from machining.
5. If the wood shows signs of ageing, it must first be sanded down, primed and any dust removed by brushing or any other mechanical means.
6. In this instance, the most suitable primer is the Selladora Sellalux.

Iron and derivatives:
1. To protect the base, treat it with suitable primers (family 6) before decorating, following the specifications in the technical sheet.
2. The surface to be painted must be free from other products and/or residues, grease and dust free, and dry. Any signs of rust should be removed by brushing or any other mechanical means. Oxifín may also be used (see technical specifications).

Plasterwork (plaster, cement and derivatives):
1. Treat these materials in the usual way, removing saltpetre, excess moisture and efflorescence.
2. Remove other products and/or residues.
3. Once dry, prime using Sellalux Primer.