MARISMA SATINADO

- Stir the product until perfectly blended.
- Apply following the standards indicated on the attached application chart.
- On new woods, first prime with Anticarcoma Klearxyl Di if preventive protection from fungus and and xylophagous insects.
- Do not apply the product at extreme temperatures or on surfaces exposed to strong sunlight.
- Maintain good ventilation conditions during drying time.
- Do not apply when relative moisture is over 80%.

New woods:
- The surface must be free from foreign products and/or residues.
- Apply to woods with a moisture content lower than 20%.
- Apply to sound dry wood, well cleaned and free of dust and grease.
- Sand and remove possible remnants of glue in joints and machining flaws.
- If the wood shows signs of ageing, first sand it, prime it and remove any dust using a brush or any other mechanical means.
- If priming, the most suitable primer to use is Sellalux Primer.

Iron and its derivatives:
- To protect the surface before decoration, treat with suitable primers (family 6), following the specifications sheet.
- To decorate the surface, it must be free of foreign products and/or residues, dry and well cleaned and free of dust and grease. If it shows signs of rusting, the rust must be removed using a brush or any other mechanical means. Oxifín is also suitable (see technical specifications sheet).

Masonry surfaces (plaster, cement and derivatives):
- Treat these surfaces in the usual way, removing saltpetre, excess moisture and efflorescence.
- Remove foreign products and/or residues.
- Once dry, prime using Sellalux Primer or equivalent.