MONTONATURE MATE
applications
- Outdoors/Indoors
- Plaster
- Stone
- Cement mortars
- Solid Wood and Veneer
- Ideal for creating smooth
- maximum-performance finishes on walls and ceilings. Also ideal for carpentry in general
- furniture
- doors
- pipes
- radiators
- etc.
- Previously primed metal: iron
- steel
- galvanised metal
- aluminium
- copper
- etc.
- Work surfaces: cast
- cement
- gypsum covered brick
- plasterboard
- Universal use: can be combined to create the same finish on a wide range of surfaces.
- PVC and plastic (conduct a previous adhesion test)
How to apply?
- Painting brush
- Roller
- Air-less gun
- Air-mix gun
- Aerographic gun
- Low preasure turbo
Colors
-Only apply on clean surfaces, clean off any dirt by using clean water and detergents.
-Follow guidelines as shown in table below.
-New wood should be previously primed with Montoxyl Fondo, to prevent surface from fungus and harmul bacteries.
-Do not apply product at high temperatures or overheated surfaces exposed to sunshine.
- Do not apply the product at temperatures below 5ºC, or to surfaces exposed to strong sunlight.
- Do not apply at relative humidity in excess of 80%.
1. Wait until fully hardened.
2. Clear possible efflorescence from the base and neutralise alkaline surfaces. Use a suitable filler to eliminate defects in the base.
3. Treat mouldy bases with Monto Limpia Moho.
New woods:
1. Apply to woods with a moisture content of less than 20%. Healthy, dry wood, well cleaned of dust and grease.
2. If the wood shows signs of ageing, it should first be sanded down, primed and any dust/powder removed through brushing or any other mechanical means.
3. Before application, prime using a suitable product, see Family 5 wood treatments.
Iron and derivatives:
1. Apply to dry bases, well cleaned of dust and grease. If these show signs of oxidation, rust must be removed through brushing or any other mechanical means. Oxifin is also suitable.
2. When this is done, treat using a suitable primer prior to application, see Family 6.
Galvanised and light metals:
1.
- Remove all grease and check the adhesion.
2.
- Priming with Montoprimer Total Acqua is recommended where necessary.
Certifications
Downloads
I´m interested in this product
I´m interested in this product
Confirm the product and your contact information to be able to inform you and advise you in a personalized way.
Readily available stock
Gestión automatizada de las ubicaciones y las existencias de los productos.
Perfect orders
Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.
Warehouse management
Ubicación automática de los productos en el almacén mediantes transelevador.
Fast loading
8 loading docks for 24-ton trucks.
Our own transport
Flota propia de camiones de reparto preparados para transporte ADR.
We are always close by
Cadena de tiendas propia y suministro a puntos de venta en toda España.
liter calculator
Para pintar m2 de superficie con mano(s) de pintura necesitas:
de MONTONATURE MATE Mate