BARNIZ PARQUET DECOR BRILLANTE

Stir the product until it is perfectly homogenized.
Properly dilute the first coat to achieve good penetration into the substrate.
On very porous or very smooth backgrounds or very hard woods it is advisable to increase the dilution of the first coat with our PU 1410 Solvent.
Coat thicknesses greater than 50 microns per coat (150 g/m2) should never be applied.
It can be applied without the need to sand between coats, although it is advisable to proceed with a light sanding in order to guarantee perfect adhesion and especially in the case of woods with a tendency to peel.
Sand between coats whenever more than 12 hours have passed since the last coat was applied.
Likewise, to obtain a finish with an excellent feel, it is also advisable to sand before the last coat.
Do not apply the product at high temperatures, or on surfaces exposed to strong sunlight. Maintain good ventilation conditions during the drying time. Do not apply with relative humidity greater than 80%.
As it is a product that can be cross-linked with humidity, once opened it must be consumed, since the absorption of ambient humidity causes it to harden.
Before applying, check that the product is completely transparent.
On porous wood, dilute the product so that it penetrates the pore and eliminates possible bubble formation.
Respect the minimum time between coats to avoid stirring.
Respect the maximum time between coats to avoid adhesion problems.
Total hardness is reached after 7 days.

New woods:

- The support must be free of foreign products and/or residues.
- Apply to wood with a moisture content of less than 12%.
- Apply to healthy, well-degreased, dust-free and dry wood.
- Sand and eliminate possible traces of glue in the assemblies and machining errors.
- If the wood shows signs of aging, it must be previously sanded and dust removed by brushing or any other mechanical means.