Home / Products / Preparaciones, fondos e impr. / Hierro y metales (imprimacio.) / IMPRIEPOX M-10

    • IMPRIEPOX M-10

    Anti-corrosive primer epoxy white, two component, on metal surfaces and ferric iron, as well as polyester.
    Performance
    8 - 12 m²/L
    Drying time
    30min
    Formats
    20K 4K
    I´m interested in this product

    applications

    • Outdoors/Indoors
    • Iron
    • Galvanized iron
    • Aluminum
    • steel
    • Brass
    • Polyesther

    How to apply?

    • Painting brush
    • Roller
    • Air-less gun
    • Air-mix gun
    • Aerographic gun
    • Low preasure turbo

    Colors

    White
    -Remove both products until its perfect homogenization.
    -Mix in the prescribed proportions and let the mixture rest about 5 minutes.
    -We recommend total thicknesses between 25 and 100 microns, depending on the desired protective effect.
    -Apply to clean, dry substrates, removing the dirt by degreasers or detergents and clean water.
    -Apply following the instructions given in the application box marked attached.
    -Do not apply at excessive heat, or on surfaces exposed to intense sunlight.
    -Maintain good ventilation conditions during the drying time.
    -Do not apply at relative humidities above 80%, applied at temperatures above 5 º C.
    - New metal supports:
    - The support must be free from any foreign bodies, oxides and/or residius.
    - Apply to a well-degreased support, without dust and dry.
    - To obtain the maximum protection, specially in iron and its derivatives it is a pre-treatment to eliminate the mil scale and rust spots, consisting of an abrasive metal blasting up to a minimum level of Swedish standar (SIS 055900) Sa2. If due to initial cost the abrasive blasting is not feasible, we should treat the metal with a hard metal scraper and wire brush to level Swedish Standard (SIS 055 900) St3.

    Downloads

    Technical specifications

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de IMPRIEPOX M-10