Home / Products / Preparaciones, fondos e impr. / Hierro y metales (imprimacio.) / IMPRIPOL

    • IMPRIPOL

    White anticorrosive primer, bi- components, cross-link dissolvent acrylics with alifatic isocyanate resin. To apply on ferric metallic surfaces. Ideal support to finish with ACRIPOL + CATALYST ACRIPOL.
    Performance
    8 - 12 m²/L
    Formats
    3.2L 0.6L
    I´m interested in this product

    applications

    • Outdoors/Indoors
    • Iron
    • steel
    • Metal

    How to apply?

    • Painting brush
    • Air-less gun
    • Air-mix gun
    • Aerographic gun
    • Low preasure turbo

    Colors

    White
    - To remove both products until its perfect homogenization.
    - To mix in the prescribed proportions and to let rest the mixture about 5 minutes.
    - We recommends thicknesses of total coats between 25 and 100 microns, based on the wished effect of protection.
    - To apply on clean and dry support, eliminating the dirt by means of  detergents and clean water.
    - To apply following the indications marked in the attached scare of application.
    - Not to apply the product to elevated temperatures, nor on exposed surfaces to strong sun.
    - To maintain the conditions of good ventilation during the masking time of the surface.
    - Not to apply with relative humidity superior to 80%, to apply to temperatures superior to 5º C.
    - Case of exceeding the recommended maximum interval for the finish one, of sandpapering to obtain good adhesion in hand and of verifying that the adhesion is correct. On the contrary to eliminate.
    New Metallic Supports:
    - The support must be free of strange products, oxides and/or remainders.
    - To apply on clean supports, without grease , dust and dry.
    - In order to obtain the bigest protection, mainly in iron and derivatives it is necessary a pre-cure for the lamination husk elimination and oxide points, consisting of shot blasting of the metal until like mini level of Swedish Norm (SIS 055900) Sa2. If by exigencies of the initial costs Shot blasting is not viable, we must deal the metal with scraper ( hard metal) and brush about wire until level Swedish Norm (SIS 055900) St3.

    Downloads

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de IMPRIPOL