IMPRIPOL + CATALIZADOR

Two-component, white ,anticorrosive primer, made from solvent-based acrylic reticulated with aliphatic isocyanates, for applying to iron and metal surfaces. Ideal for repainting with ACRIPOL + CATALIZADOR ACRIPOL.
Performance
8 - 12 m²/L

applications

  • Outdoors/Indoors
  • Iron
  • steel
  • Metal
  • Galvanized metal

How to apply?

  • Painting brush
  • Air-less gun
  • Air-mix gun
  • Aerographic gun
  • Low preasure turbo

Colors

White
-Stir both products until perfectly blended.
-Mix to the required proportions and leave the mixture to settle for around 5 minutes.
-A total layer thickness of between 25 and 100 microns is recommended, depending on the desired protection effect.
-Apply to clean dry substrates, removing any dirt with grease remover or detergents and clean water.
-Apply following the instructions on the applicable table attached.
-Do not apply the product at high temperatures or on surfaces exposed to strong sunlight.
-Ensure the area is well ventilated while the product is drying.
-Do not apply with relative moisture levels of over 80% -  apply at temperatures over 5º C.
-If the maximum interval for repainting has passed, sand down to ensure good adhesion between coats and check to ensure correct adhesion.Otherwise, remove.
-New metal surfaces:
-The surface should be free from foreign products, rust and/or residues.
-Apply to clean, dry, dust-free surfaces.
-For maximum protection, particularly on iron and its derivatives, a pre-treatment it required to remove the roll scale and rust. This should be done with an abrasive blasting to at least Swedish Standard (SIS 055900) Sa2. If, for initial cost reasons, the Abrasive Blasting is not viable, the metal should be treated with a hard metal scraper and a wire brush up to Swedish Standard (SIS 055900) St3.

I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.