SMART ANTI RADIACIONES

- How to use. For optimum shielding the paint should be applied undiluted.
- Shake the product until it is fully blended.
- For 'difficult' surfaces, dilute the product according to the porosity and condition of the substrate in the first coat.
- Use the same paint to finish, until the appropriate thickness is reached according to the application.
- Do not apply the product at temperatures below 5º C or above 35º C, or if there is an imminent risk of rain.
- Do not apply in full sun or on days with excessive humidity.
- A correct prescription should be sought from a qualified professional when implementing the paint in systems where the shielding functions alongside other processes.

-Cement mortar:
- Wait until totally set, at least 30 days.
- Use an abrasive jet to remove any potential efflorescence from the base and neutralise alkaline surfaces.
- Sand highly polished surfaces to roughen them slightly.
-Use a suitable fixative to fix crumbly bases (See family 6).
- Remove any other products and/or residue from the base.
- Use plaster to fill any defects in the base (to make a suitable selection, see the PREPARING BASES family for lines of powder plaster and prepared fillers).
- Plaster:
- Wait until it is fully dry - maximum 20% humidity.
- Remove any other products and/or residue from the base.
- Remove any efflorescence.
- Use a suitable sealant primer to regulate surface absorption.
- Sand highly polished surfaces to roughen them slightly.
-Use a suitable fixative to fix crumbly or floury bases (See family 6).
- Use plaster to fill any defects in the base (to make a suitable selection, see the PREPARING BASES family for lines of powder plaster and prepared fillers).
-Treat mouldy bases with Monto Limpia Moho.