Inicio / Productos para uso especifico / Epoxis al agua / Two-component water-based epoxy. For fixed drinking water tanks, hospitals, operating theatres, etc. Resistant to washing with chemicals.

    • Two-component water-based epoxy. For fixed drinking water tanks, hospitals, operating theatres, etc. Resistant to washing with chemicals.

    Water-based epoxy paint for indoor use in health or food facilities, with two components, for painting walls directly or walls with woven fibreglass reinforcing, also for fixed drinking water tanks.
    Rendimiento
    4 - 6 m²/L
    Tiempo de secado
    (20ºC HR:60%):1-2h
    Me interesa este producto

    Colores

    White
    -Performing operations tinting and homogenization of part A before adding the catalyst.
    Mix 2-components in the indicated proportions, using a high speed stirrer, until homogeneous.
    -Homogenize both products.
    Part-Mix thoroughly and let stand Catalyst + at least 5 minutes.
    -Dilute to application viscosity.
    -Apply at temperatures above 15 ° C.
    -On the fiberglass mesh Montoepox primed with Montoepox Aqua sanitario, to remove and regulate repelo porosity, finish 2-3 coats of Montoepox Aqua Sanitario.
    -Make the filling after setting all Product (minimum 7 days).
    - It is not suitable for use in direct contact with food.
    - Humidity of flooring: maximum of 4% measured at a depth of 2cm.
    Cement Mortar:
    1. Wait until completely set (min 30 days).
    2. Clean abrasivejet possible efflorescence.
    3. Neutralize alkaline surfaces.
    4. In polished surfaces: sand to open pore.
    5. Clean foreign product support.
    6.
    Fijar despicable media Fixer or Fijamont emulsion.
    7.
    Masillar support defects (see family 6)

    plaster:
    1.
    Wait until thoroughly dry (max, 20% humidity).
    2.
    Clean strange product support.
    3.
    Limpiar possible efflorescence abrasive blasting.
    4.
    Regular takeovers of bracket with sealant, adhesive, or hand the same product diluted
    5.
    The polished surfaces: sand to open pore
    6.
    Fijar despicable media Fixer or Fijamont emulsion.
    7.
    Masillar support defects (see family 6)

    Descargas

    Ficha técnica

    ¡Me interesa
    este producto!

    Confirma el producto y tus datos de contacto para que podamos informarte y asesorarte de forma personalizada

    Stock siempre disponible

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Pedidos perfectos.

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Control de almacén.

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Carga rápida.

    Ocho muelles de carga para camiones de 24 toneladas.

    Transporte propio.

    Flota propia de camiones de reparto preparados para transporte ADR.

    Nos tienes cerca.

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Calculadora de litros

    El número de manos depende de la superficie a aplicar el producto.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de Two-component water-based epoxy. For fixed drinking water tanks, hospitals, operating theatres, etc. Resistant to washing with chemicals.