Inicio / Preparaciones, fondos e impr. / En polvo (masillas) / Cement-based powder filler for outdoors, with a fine texture and extreme hardness. Once dry, it can be immediately recoated (without the danger of causing saltpeter), with all common types of facade coatings. It allows large layer thicknesses to be left without cracking or shrinkage.

    • Cement-based powder filler for outdoors, with a fine texture and extreme hardness. Once dry, it can be immediately recoated (without the danger of causing saltpeter), with all common types of facade coatings. It allows large layer thicknesses to be left without cracking or shrinkage.

    Cement-based powder filler for outdoor use. Fine texture and extremely durable. Once dry it can be immediately repainted (with no danger of forming saltpetre) with any kind of coating normally used on façades. Thick coats may be applied with no danger of cracking or reduction.
    Tiempo de secado
    1h
    Me interesa este producto

    Colores

    White
    The minimum recommended yield is 1 mm.
    , with an unlimited maximum.
    Dilute with water using approximately 400 ml of water per 1 kg of powder.
    The pH of the recently mixed product is 11, falling to 9 after 24 hours, which allows for repainting.
    Once applied, the product should not be left exposed to the elements, so it should be painted or coated after 24 hours.
    Do not apply to polystyrene.
    Do not apply to wet bases.
    Cement mortar, plaster or porous brickwork:
    - Check the suitability of the putty for the base.
    - Wait until the base is completely set.
    - Clean possible efflorescence from the base and neutralise alkaline surfaces.
    - Sand down highly polished surfaces to open up the pore.
    - Remove any foreign products and residues from the base.
    - Open up any cracks and fissures until the base is repaired, remove the dust produced with a brush and apply the putty or plaster as indicated in the Application Systems and Application sections.

    Descargas

    ¡Me interesa
    este producto!

    Confirma el producto y tus datos de contacto para que podamos informarte y asesorarte de forma personalizada

    Stock siempre disponible

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Pedidos perfectos.

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Control de almacén.

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Carga rápida.

    Ocho muelles de carga para camiones de 24 toneladas.

    Transporte propio.

    Flota propia de camiones de reparto preparados para transporte ADR.

    Nos tienes cerca.

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Calculadora de litros

    El número de manos depende de la superficie a aplicar el producto.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de Cement-based powder filler for outdoors, with a fine texture and extreme hardness. Once dry, it can be immediately recoated (without the danger of causing saltpeter), with all common types of facade coatings. It allows large layer thicknesses to be left without cracking or shrinkage.