Inicio / Antihumedad e impermeabilizac. / Elastic coating for the protection and waterproofing of façades. Covers cracks of up to 2 mm. Photoreticulable Excellent adhesion, high resistance to alkalinity and extreme temperatures.

    • Elastic coating for the protection and waterproofing of façades. Covers cracks of up to 2 mm. Photoreticulable Excellent adhesion, high resistance to alkalinity and extreme temperatures.

    Photoreticulable elastic and waterproof membrane for protection and decoration of façades and exterior walls. Isolates the façade from rainwater. Highly durable and resistant: sunlight (UV), extreme temperatures, rainwater, environmental dirt, microorganisms and mould, chalk, colour degradation, carbonation of concrete, paint ageing. Ideal for professional application. This product contributes to LEED®, BREEAM® and VERDE certifications.
    Acabado
    Mate
    Rendimiento
    3 - 4 m²/L
    Tiempo de secado
    (20ºC HR:60%):4-6h
    Me interesa este producto

    Colores

    Bases: White 102, IN and TR Colours from the COF and FACHADAS ETERNA charts. TINTOMETRIC SYSTEMS. Tinted with Montotinte maximum 5%.
    - Do not apply the product at temperatures below 5ºC C or above 35ºC or with imminent risk of rain.
    - Do not apply in full sun or on excessively humid days.
    - Shake the product until it is perfectly homogenised.
    - For the first coat, dilute the product according to the porosity and state of the surface.
    - Finish with one or more lightly diluted coats until the surface is completely covered.
    Concrete and cement mortars:
    1. Wait until completely set (minimum 30 days).
    2. Use an abrasive jet to remove any potential efflorescence from the base
    3. Neutralise alkaline surfaces.
    4. Sand down highly polished surfaces to open up the mortar.
    5. Remove any strange products and/or residues from the base.
    6. Use a suitable fixative to fix crumbly bases (Fijamont/Emulsion Fijadora).
    7. Use outdoor plaster to fill any defects in the base (Plasmont Fibra Elástico/ Plasmont Exteriores or equivalent from the Montó range)

    Porous bricks:
    1. Remove any cracks, holes or irregularities with Plasmont Exterior or Montó equivalent.
    2. Clean the surface before painting.
    3. It is advisable to apply a primer before painting due to the porosity of the brick, thus avoiding wasting paint.

    Certificaciones

    Descargas

    ¡Me interesa
    este producto!

    Confirma el producto y tus datos de contacto para que podamos informarte y asesorarte de forma personalizada

    Stock siempre disponible

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Pedidos perfectos.

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Control de almacén.

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Carga rápida.

    Ocho muelles de carga para camiones de 24 toneladas.

    Transporte propio.

    Flota propia de camiones de reparto preparados para transporte ADR.

    Nos tienes cerca.

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Calculadora de litros

    El número de manos depende de la superficie a aplicar el producto.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de Elastic coating for the protection and waterproofing of façades. Covers cracks of up to 2 mm. Photoreticulable Excellent adhesion, high resistance to alkalinity and extreme temperatures. Mate