Inicio / Esmaltes / Anti-rust and rust passivation enamel with high protection against corrosion. 3 in 1: rust passivator, primer and finishing enamel. Saves time and layers in the application process. Smooth forge effect finish. Washable, easy to clean.

    • Anti-rust and rust passivation enamel with high protection against corrosion. 3 in 1: rust passivator, primer and finishing enamel. Saves time and layers in the application process. Smooth forge effect finish. Washable, easy to clean.

    Antioxidant and direct oxide enamel, with high protection against corrosion. Smooth finish emulating the traditional metallic effect forging. 3 in 1: rust passivator, primer and topcoat. Save time and layers by not needing a primer and drying faster than traditional synthetic enamels. Decorative enamel of high quality and duration.
    Acabado
    Liso
    Rendimiento
    8 - 10 m²/L
    Tiempo de secado
    (20ºC HR:60%):1h
    Me interesa este producto

    Colores

    Black, Grey and Brown
    - Apply on a clean and dry surface, removing dirt with degreasers or detergents and clean water.
    - Stir the product until it is perfectly homogenised.
    - Do not apply the product at high temperatures, or on surfaces exposed to strong sunlight.
    - Maintain good ventilation conditions during the drying time.
    - Do not apply while the relative humidity is above 80%.
    - There may be changes in drying, performance or other properties depending on climatic and application variations.
    - A minimum application of two coats at 50 microns dry is recommended (8 m2/l for layer), for adverse conditions this thickness should be increased to 150 microns.
    - For an optimum finish, spray application is recommended.
    - New and rusty surfaces:
    - The surface must be free of foreign matter and/or residues, well degreased, free of calamine and dry.
    - If there are rust spots, it is not necessary to remove them, only to sand and remove badly adhered particles if they exist. Then directly apply Ferrorite.
    - If there are areas of corrosion, remove loose rust and scale with wire brushes or abrasive brushes (ST3).
    - Do not forget the recommended thickness to ensure proper corrosion protection.

    Descargas

    ¡Me interesa
    este producto!

    Confirma el producto y tus datos de contacto para que podamos informarte y asesorarte de forma personalizada

    Stock siempre disponible

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Pedidos perfectos.

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Control de almacén.

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Carga rápida.

    Ocho muelles de carga para camiones de 24 toneladas.

    Transporte propio.

    Flota propia de camiones de reparto preparados para transporte ADR.

    Nos tienes cerca.

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Calculadora de litros

    El número de manos depende de la superficie a aplicar el producto.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de Anti-rust and rust passivation enamel with high protection against corrosion. 3 in 1: rust passivator, primer and finishing enamel. Saves time and layers in the application process. Smooth forge effect finish. Washable, easy to clean. Liso