High quality enamel. Maximum resistance to atmospheric agents. Excellent hardness, brushability, coverage, opacity and flexibility. Completely washable.

Stir the product until perfectly blended.
Apply in accordance with the instructions given in the attached application table.
-New wood should first be primed using Montoxyl Fondo (cod. 1301) if you wish to protect it against fungus or bacteria.
Do not apply the product at high temperatures or on surfaces exposed to strong insolation.
- Ensure good ventilation while product is drying.
- Do not apply with relative moisture over 80%.

New wood:
1. The base must be free from foreign materials and/or waste matter.
2. Apply to wood with a moisture content of less than 20%.
3. Apply to wood which is healthy, dry and free from grease and dust.
4. Sand down and remove any remnants of glue from the joints and defects from mechanical process.
5. If the wood shows signs of ageing it must first be sanded down, primed and any dust removed using a plane or any other mechanical device.
6. In this instance the most suitable primer is the Selladora Sellalux.

Iron and its derivatives:
1. To protect the material, prior to decorating, treat with suitable primers (family 6) following the specifications given on the card.
2. To decorate the material it must be free from foreign materials and/or waste matter and should be dry and free from grease and dust. If it shows signs of rusting, the rust should be removed using a planing machine or any other mechanical device. Also suitable for use is Oxifín (see technical record).

Plaster work (plaster/ gypsum, cement and derivatives):
1. Treat these mediums in the usual way, removing saltpetre, excess moisture and efflorescence.
2. Remove foreign materials and/or waste matter.
3. Once dry, prime using Sellalux Primer.