Synthetic enamel with good resistance for interior and exterior use. Elastic, good hardness, coverage and adhesion. Washable.

-Stir the product until perfectly blended.
-Apply, following the rules set out in the attached application table.
-To print previously, on new wood, with Klearxyl Di if a preventive protection against fungi and insects is desired.
-Do not apply the product in extreme temperatures, or on surfaces exposed to strong sunlight.
-Keep the space well ventilated while the product is drying.
-Do not apply with relative humidity above 80%.

New wood surfaces:
1. The base must be free from foreign materials and/or waste products.
2. Apply on wood with a moisture content of less than 20%.
3. Apply on healthy wood that is dry and free of grease and dust.
4. Sand down and remove any remains of glue in joints and defects from mechanical processes.
5. If the wood shows signs of ageing it must first be sanded down, primed and any dust removed by brushing or any other mechanical device.
6. In this instance the most suitable primer is Selladora Sellalux.

Iron and derivatives:
1. To protect the surface, prior to decoration work, treat with suitable primers (family 6) following the specifications given on the product information sheet.
2. The surface to be painted must be free of other products and/or residues, grease and dust free, and dry. Any signs of rust should be removed by brushing or any other mechanical means. Oxifín may also be used (see product technical information sheet).

Works (plaster/ gypsum, cement and derivatives):
1. Treat these surfaces in the usual way, removing saltpetre, excess moisture and efflorescence.
2. Remove foreign products and/or waste matter.
3. Once dry, prime using Imprimación Sellalux.