Alkaline-free plastic filler paste. It allows small repairs to be carried out on facades and walls and repainting without problems of alkalinity Ready for use. Saves downtime and material loss.

-Very absorbent surfaces should be previously moistened.
-Only repaint after indicated drying time, which depends on moisture and temperature conditions as well as coat thickness.
-Use only recommended clean and dust-free tools as per Application Systems.

Plaster and cement morter:
-Apply suitable fixer before puttying (see family 6) Emulsion Fijadora, Fijamont, Fijalite.
-Test PLASMONT AL USO suitability on surface.
-Wait till complete drying of product (30 days).
-Remove off any efflorescences and neutralize alkaline surfaces.
-Extremely polished surfaces should be sandpapered to open pores.
-Remove off any foreing products or remains.
-Open any fissures or cracks until obtaining good condition surface. Remove off any resulting dust by brushing and apply PLASMONT AL USO as recommended under Application Systems and Application points.
-For extremely damaged surfaces, use suitable fixer (see family 6) before puttying.
-Recommended maximum thickness per coat should always be observed.
Wood:
-Test PLASMONT ACABADOS suitability on surface.
-Extremely polished surfaces should be sandpapered to open pores.
-Remove off any foreing products or remains.
-Open any fissures or cracks until obtaining good condition surface. Remove off any resulting dust by brushing and apply PLASMONT ACABADOS as recommended under Application Systems and Application points.
-Recommended maximum thickness per coat should always be observed.
-Only apply on wood in good condition, with no trace of resine exudates, dry and free of dust and grease, with less than 20% moisture level.
-Old wood should be previously sandpapered and dust-free.