Synthetic primer with excellent brushability and levelling properties. Regulates the absorption of porous surfaces. High adhesion as a primer or topcoat. Excellent whiteness and coverage.

-Stir product thoroughly.
-Follow application guidelines shown on table below.
-Do not apply product at high temperatures or overheated surfaces exposed to sunshine.
-Keep room well ventilated while product is drying.
-Do not apply when moisture contents is over 80%.

Cement morter, plaster and by products.
-Wait till complete drying of product (30 days minimum).
-Surface should be totally dry.
-Remove off any efflorescences and neutralize alkaline surfaces.
-Remove off any foreing products or remains.
-Cover surface imperfections with suitable plaster or putty (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Mildewed surfaces should be treated with Montolimp.
-New wood:
-Only apply on wood with less than 12% moisture content.
-Sandpaper and eliminate any remains in joints and mechanical faults.
-Old wood should be previously sandpapered and primed. Remove any dust by brushing it off or using any other mechanical system.
-Cover surface imperfections with plaster or putty (See Family 6 to help you choose the most suitable product to prepare surfaces).
-We recommend applying Anticarcomas Klearxyl Di due to its fungicidal action.
Iron and steel:
-Remove off any rust by abrasive blast cleaning before finishing coat application.
-Paint, primer and pre-treatment are equally important.
-If abrassive blast cleaning is not possible, remove off any rust by brushing, sandpapering or any other mechanical system. Any old rust can also be treated by applying our Oxifin (ref. 1900).