Two-part epoxy primer for metals, formulated with non-toxic anticorrosives. High anti-rust and adhesive power on light metals. Hardness, toughness and durability.
Colores
-Mix in the prescribed proportions and let the mixture rest about 5 minutes.
-We recommend total thicknesses between 25 and 100 microns, depending on the desired protective effect.
-Apply to clean, dry substrates, removing the dirt by degreasers or detergents and clean water.
-Apply following the instructions given in the application box marked attached.
-Do not apply at excessive heat, or on surfaces exposed to intense sunlight.
-Maintain good ventilation conditions during the drying time.
-Do not apply at relative humidities above 80%, applied at temperatures above 5 º C.
- The support must be free from any foreign bodies, oxides and/or residius.
- Apply to a well-degreased support, without dust and dry.
- To obtain the maximum protection, specially in iron and its derivatives it is a pre-treatment to eliminate the mil scale and rust spots, consisting of an abrasive metal blasting up to a minimum level of Swedish standar (SIS 055900) Sa2. If due to initial cost the abrasive blasting is not feasible, we should treat the metal with a hard metal scraper and wire brush to level Swedish Standard (SIS 055 900) St3.
Descargas
¡Me interesa
este producto!
Confirma el producto y tus datos de contacto para que podamos informarte y asesorarte de forma personalizada
Stock siempre disponible
Gestión automatizada de las ubicaciones y las existencias de los productos.
Pedidos perfectos.
Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.
Control de almacén.
Ubicación automática de los productos en el almacén mediantes transelevador.
Carga rápida.
Ocho muelles de carga para camiones de 24 toneladas.
Transporte propio.
Flota propia de camiones de reparto preparados para transporte ADR.
Nos tienes cerca.
Cadena de tiendas propia y suministro a puntos de venta en toda España.
Calculadora de litros
Para pintar m2 de superficie con mano(s) de pintura necesitas:
de Two-part epoxy primer for metals, formulated with non-toxic anticorrosives. High anti-rust and adhesive power on light metals. Hardness, toughness and durability.