Inicio / Productos para uso especifico / Instalaciones deportivas / Special paint for the maintenance and renovation of natural stone used in swimming pool surrounds. Maintains roughness and absorption of the substrate.

    • Special paint for the maintenance and renovation of natural stone used in swimming pool surrounds. Maintains roughness and absorption of the substrate.

    Special mineral-based toner for artificial stone. Bone-white colour. Maintains the roughness, texture, porosity and absorption of the surface, recovering the initial tone of this type of stone (bone-white).
    Rendimiento
    10 - 14 m²/L
    Tiempo de secado
    (20ºC - Hr 60%): 2 h
    Me interesa este producto

    Colores

    Bone White
    1. Apply on clean and dry surfaces.
    2. As it is not film-forming, it may leave a white deposit, and can wear away with use.
    3. Apply the first coat of pool surround restorer, diluting the product by 0-30% depending on the porosity of the surface.
    4. Leave to dry 24 hours before applying the second coat.
    5. Apply a second coat.
    6. Let the application cure at least one week before filling the pool or letting the surface get wet.
    7. Apply when the stone is cool, never when warm or in full sun.
    8. We recommend repainting, following the advice in the section Preparation and Surface, at least once a year.
    1. Clean the surface thoroughly and roughen the surface, preferably with traditional mechanical methods, and if this is not possible, by chemical means (diluted hydrochloric acid).
    2. Rinse with plenty of water if using hydrochloric acid.
    3. Allow to dry.
    4. Apply the first coat of pool surround restorer, diluting the product by 0-30% depending on the porosity of the surface and the means of application. It is always preferable for the first coat to be as diluted as possible, so it soaks into the surface completely.
    5. Leave to dry 24 hours before applying the second coat.
    6. Let the application cure at least one week before filling the pool or letting the surface get wet.
    7. Apply when the stone is cool, never when warm or in full sun.
    8. We do not recommend using any product to prepare the surface.
    9. Apply a maximum of 5m2/L counting both the recommended coats.

    Descargas

    ¡Me interesa
    este producto!

    Confirma el producto y tus datos de contacto para que podamos informarte y asesorarte de forma personalizada

    Stock siempre disponible

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Pedidos perfectos.

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Control de almacén.

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Carga rápida.

    Ocho muelles de carga para camiones de 24 toneladas.

    Transporte propio.

    Flota propia de camiones de reparto preparados para transporte ADR.

    Nos tienes cerca.

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Calculadora de litros

    El número de manos depende de la superficie a aplicar el producto.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de Special paint for the maintenance and renovation of natural stone used in swimming pool surrounds. Maintains roughness and absorption of the substrate.