Coating for protecting and decorating concrete. High coverage.
Colores
- Dilute the product in terms of porosity and state of the support.
- In the first coat high dilutions are recommended that could reach 40%. In this way the product will penetrate the maximun in the support.
- It is recommended total layer thickness of around 250 microns wet.
- Apply to clean and dry substrates.
- Apply following the instructions marked on the attached application chart.
- Do not apply the product at high temperatures, or on surfaces exposed to intense sunlight.
- Do not apply at temperatures below 5 ° C.
1. Wait until total drying (minimum 30 days).
2. Clean any efflorescence with abrasive blasting.
3. Neutralize the alkaline surfaces.
4. On slick surfaces, sanding to open pore.
5. Clear support for foreign products.
6. Fix crumbly surfaces with a suitable fixative (see Family 6)
7. Cover surface imperfections with plaster or putty (See Family 6)
Certificaciones
Descargas
¡Me interesa
este producto!
Confirma el producto y tus datos de contacto para que podamos informarte y asesorarte de forma personalizada
Stock siempre disponible
Gestión automatizada de las ubicaciones y las existencias de los productos.
Pedidos perfectos.
Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.
Control de almacén.
Ubicación automática de los productos en el almacén mediantes transelevador.
Carga rápida.
Ocho muelles de carga para camiones de 24 toneladas.
Transporte propio.
Flota propia de camiones de reparto preparados para transporte ADR.
Nos tienes cerca.
Cadena de tiendas propia y suministro a puntos de venta en toda España.
Calculadora de litros
Para pintar m2 de superficie con mano(s) de pintura necesitas:
de Coating for protecting and decorating concrete. High coverage. Mate