Inicio / Revestimientos de fachadas / Revestimientos pliolite / Pliolite coating for the protection and decoration of façades and outdoor walls. High level of strength and durability. Maximal adherence without priming. Breathable and waterproof.

    • Pliolite coating for the protection and decoration of façades and outdoor walls. High level of strength and durability. Maximal adherence without priming. Breathable and waterproof.

    Smooth pliolite coating, for protecting and decorating façades and exterior walls. Maximum adhesion and low surface tension: ideal for damaged surfaces, water-repellent and self-cleaning. Perfect balance of breathability and waterproofing. Provides high durability and resistance: sunlight (UV), extreme temperatures, rainwater, environmental dirt, microorganisms and mould, chalk, colour degradation, concrete carbonation and paint ageing. Ideal for professional application: high coverage, high performance, low gloss and fast execution. This product contributes to LEED®, BREEAM® and VERDE certifications.
    Acabado
    Mate
    Rendimiento
    8 - 12 m²/L
    Tiempo de secado
    (20ºC HR:60%):1h
    Me interesa este producto

    Colores

    Bases: BL, IN, TR White 103, colours chart COF / FACHADAS ETERNA
    - Do not apply the product at temperatures below 5ºC C or above 35ºC or with imminent risk of rain.
    - Do not apply in full sun or on excessively humid days.
    - Shake the product until it is perfectly homogenised.
    - For the first coat, dilute the product according to the porosity and state of the surface.
    - Finish with one or more lightly diluted coats until the surface is completely covered.
    Concrete and cement mortars:
    1. Wait until fully set 30 days minimum
    2. Clean the surface of possible efflorescence via abrasive blasting
    3. Neutralise alkaline surfaces.
    4. On polished surfaces, sand to create a rougher surface.
    5. Clean the surface to remove foreign products.
    6. Fix crumbly surfaces with a suitable fixative (Fijamont or Fixing Emulsion).
    7. Use putty on surface defects (Elastic or Plasmont Exterior or Montó equivalent).

    Porous bricks:
    1. Remove any cracks, holes or irregularities with Plasmont Exterior or Montó equivalent.
    2. Clean the surface before painting.
    3. It is advisable to apply a primer before painting due to the porosity of the brick, thus avoiding wasting paint.

    Certificaciones

    Descargas

    ¡Me interesa
    este producto!

    Confirma el producto y tus datos de contacto para que podamos informarte y asesorarte de forma personalizada

    Stock siempre disponible

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Pedidos perfectos.

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Control de almacén.

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Carga rápida.

    Ocho muelles de carga para camiones de 24 toneladas.

    Transporte propio.

    Flota propia de camiones de reparto preparados para transporte ADR.

    Nos tienes cerca.

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Calculadora de litros

    El número de manos depende de la superficie a aplicar el producto.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de Pliolite coating for the protection and decoration of façades and outdoor walls. High level of strength and durability. Maximal adherence without priming. Breathable and waterproof. Mate